MS2014SBO2氧氣感測器
- 採用螢光氧原理,使用壽命較長
- Sensor可延伸10米,增加量測距離
- 主機端與感測端皆採空中對接設計,方便施工
- 內含繼電器可輸出訊號(A/B型接點可選擇),即時控制
- 精準度 ±0.5 vol%
「O2氧氣感測器」主要用於偵測環境空氣中之氧氣含量比例。大氣中含氧量為 20~21%,若低於18%以下,人體會產生缺氧症狀,因此在局限空間與缺氧等危險場所,在進入前均需判斷此空間之空氣含氧量,以避免人員進入後發生危險。此產品具0~25%含氧檢測功能,使用者可依需求設定各警示上下限,可各別設定警報聲響、燈號、繼電器輸出等之氧濃度%,並具備清晰易讀的大字幕顯示、蜂鳴器、燈號示警與DO輸出功能。
可應用範圍
- 半導體廠、光電面板廠、食品廠等工廠室內設備或廠房
- 有局限空間作業危害風險之區域
- 其他具缺氧危險之室內場所
功能規格
項目 | 規格 |
---|---|
感測原理 Sensing Principle |
Fluorescent oxygen |
偵測氣體種類 Type of Gas Detected |
O2 |
氧氣偵測範圍 Detection Range |
0 ~ 25.0 vol% |
工作壓力範圍 Working Pressure Range |
500 ~ 1200mbar |
操作溫度 Operation Temperature Range |
-20℃~+60℃ |
操作濕度範圍 Operation Humidity Range |
0-99% RH |
氧氣偵測響應時間 Oxygen Detection Response Time |
T90 < 30 s |
輸出漂移 Output Drift |
<0.1%/month |
解析度 Resolution |
0.1 vol% |
精準度 Accuracy |
±0.5 vol% |
人機介面 Human Machine Interface |
Buzzer Indicator LED(Red、Green) Button Backlit text display (LCM) |
輸出訊號 Output |
Relay (form A/B contact) |
外殼材質 Enclosure Material |
Paint galvanized plate |
感測器可延伸距離 Extendable Distance of the Sensor |
<10 M |
尺寸 Dimensions |
135 mm(Length) x 94 mm(Width) x 32 mm(Height) |
主機重量 Weight |
530 g (wire excluded) |
電源 Power |
24VIN ±10% |
最大耗電量 Maximum Power Consumption |
24V, 5 W (approximate) |
校正 Calibration |
Low: 10.0% (Mixture of Gases - O2/N2) High: 20.9% (Synthetic air - Zero Air) |